Snmp; Network Alarm - EverFocus EPN4122 User Manual

7.3.5

SNMP

The default values for SNMP v1/v2/v2c and SNMP v3 are already filled in. Click either of the Enable
buttons to enable either of the two. Make your changes as desired. Click on the Trap Address field to
enter the digits, if required.
7.3.6

Network Alarm

This function works with EverFocus's CMS software, e.g. the Power Video Plus. For the setting details,
please refer to the CMS network alarm protocol.
EPN4122/4122i/4220/4220i/4220p/4220pi
52