MUTOH ValueJet VJ-1204 User Manual page 80

4.8.1.9 Pre Heater menu
Set up the Pre Heater temperature.
Set up to acclimatize and preheat the media before printing.
Notes
•
The temperature to be set for the Pre Heater varies depending on the media which is used.
For recommended temperature settings of Pre Heater, refer to the "Recommended media list".
Setup Item
Pre Heater Off / <30° C> to 50° C
—
4.8.1.10 Fixer (platen) menu
Set up the Fixer (Platen) Heater temperature.
Set up this menu to warm up the loaded media and improve the printing quality. (Ink fixation)
Notes
•
Preset temperature to be set for the Fixer (Platen) varies depending on the media which is used.
For recommended temperature settings of Fixer (Platen), refer to the "Recommended media list".
Setup Item
Fixer (platen) Off / <30° C> to 50° C
Heater
—
Setting Value
Setting Value
80
User's Guide ValueJet 1204
Chapter 4: Handling the printer
Description
Set up the Pre Heater temperature.
1. Roll media
2. Pre Heater
3. Print head
•
[Enter] key: Save the setting and shift to the
previous hierarchy.
•
[Cancel] key: Cancel the setting and shift to
the previous hierarchy.
► User media menu
Description
Set up the fixer (platen) temperature.
1. Roll media
2. Fixer (Platen) Heater
3. Print head
•
[Enter] key: Save the setting and shift to the
previous hierarchy.
•
[Cancel] key: Cancel the setting and shift to
the previous hierarchy.
► User media menu
AP-75740 – Rev 1.1 – 23/01/2007