To install the roll media, follow the steps below.
Step 1 :
Remove the movable flange from the scroller.
Step 2 :
Install the optional three-inch core adapters :
•
If using media on a 2 inch core: Don't use the three-inch core adapters, go to step 3.
•
If using media on a 3 inch core : Click a three-inch core adapter (3) on the fixed flange (2)
and the movable flange (1) as shown on the image below.
Step 3 :
Put the roll media on the scroller. See image below for the correct roll direction.
No.
1
Movable flange
2
Fixed flange
3
Three-inch core adapter
Printable side outside
49
Chapter 4: Handling the printer
Name
AP-75740 – Rev 1.1 – 23/01/2007
User's Guide ValueJet 1204