MUTOH ValueJet VJ-1204 User Manual page 36

(3) Replacement steps
Caution
•
When handling ink cassettes, be careful not to get ink into your eyes or on your skin. However,
if this happens, flush immediately with water. Otherwise, your eyes may become inflamed
slightly. If you feel discomfort, consult a doctor immediately.
•
Do not disassemble ink cassettes. Otherwise, ink may get into your eyes or on your skin.
Notes
•
Do not shake ink cassettes. Doing so may cause ink leakage.
•
Do not disassemble the ink cassette. A disassembled ink cassette cannot be used.
•
When an ink cassette is moved from a cold place to a warm place, keep the ink cassette unused for
three hours or more in the printing environment.
•
Do not refill the ink cassettes.
Doing so may result in incorrect printing.
•
Insert or remove the ink cassette at the time of replacement only.
Inserting or removing ink cassettes except at the time of replacement may result in incorrect printing.
To replace ink cassettes, follow the steps below
Step 1 : Verify that the plotter has been switched ON.
Notes
•
Do not replace ink cassettes when the plotter is switched OFF. Doing so may result in incorrect
detection of the remaining ink and result in abnormal printing behaviour.
Step 2 : Remove the empty ink cassette(s) (1) from the ink cassette slot (s) (2)
Notes
•
A used ink cassette should be put in a vinyl bag or bag used for this kind of waste. Disposal of an ink
cassette has to be done in compliance with the regulations and instructions of the local authorities.
Nr. Part Description
1 Ink cassette
2 Ink cassette slot
36
User's Guide ValueJet 1204
Chapter 3: Installing the Unit
AP-75740 – Rev 1.1 – 23/01/2007