Slip Display - Lexus LX 570 2016 Service Manual

330
4-5. Using the driving support systems

Slip display

●
When tire slippage is detected,
the tilt meter display area is auto-
matically switched to the slip dis-
play.
Tire display
1
Indicates the position of freely
spinning tires in yellow if the tire
spins. (During Crawl Control is
operating, all of the tires are indi-
cated in yellow.)
Pop-up display of the Lexus parking assist-sensor
2
Displayed if an obstacle is detected while the Lexus parking assist-sensor is
turned on.
Pop-up display of the RCTA
3
Displayed if a vehicle approaching from right or left rear of the vehicle is
detected while the RCTA is turned on.
Front view & dual side view display
■
The screen can be displayed when the shift lever is in P, D or N.
Front view rotating display function
■
The vehicle inclination displayed on the screen may differ from the actual state.
●
When the rotated screen is displayed, the corners of the front bumper may not be seen
●
on the screen.
Tilt meter display
■
The display indicates the incline of the vehicle in degrees shown by the movement of
●
the pointer and the rotation of the vehicle image.
The color of the degree markers of incline to the front, rear, left and right changes
●
according to the current incline of the vehicle.
After the engine switch is turned to IGNITION ON mode, the degree of incline is not
●
displayed until such information is determined.
The degree of incline showed on the tilt meter is only an approximate indication, and
●
may differ from the degree of incline measured using other equipment.
Tilt meter/slip display
■
When the intuitive parking assist or RCTA detects an obstacle or another vehicle, a
warning message pops up in the tilt meter/slip display area.
LX570_OM_OM60N01U_(U)