Turn Signal Lever; Operating Instructions - Lexus LX 570 2016 Service Manual

216
4-2. Driving procedures

Turn signal lever

Operating instructions

The turn signal lever can be used to show the following intentions of the driver:
Right turn
1
Lane change to the right (move the
2
lever partway and then release it)
The right hand signals will flash 3 times.
Lane change to the left (move the
3
lever partway and then release it)
The left hand signals will flash 3 times.
Left turn
4
Turn signals can be operated when
■
The engine switch is in IGNITION ON mode.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear turn signal lights has not burned out.
If the turn signals stop flashing before a lane change has been performed
■
Operate the lever again.
To discontinue flashing of the turn signals during a lane change
■
Operate the lever in the opposite direction
Customization
■
The number of times the turn signals flash during a lane change can be changed.
(Customizable features P. 585)
LX570_OM_OM60N01U_(U)