126
3-2. Opening, closing and locking the doors
Jam protection function
■
If anything obstructs the power back door while it is closing/opening, the back door will
●
automatically operate in the opposite direction.
If the lower back door is opened while the upper back door is in a closing operation, it
●
automatically opens again.
When re-connecting the battery
■
To enable the power back door to operate properly, perform the following:
Unlock the back door using the door lock switch
●
Close the back door manually
●
Back door closer
■
In the event that the upper side and lower side of the back door are left slightly open, the
back door closer will automatically close them to the fully closed position.
Fall-down protection function
■
While the power back door is opening automatically, applying excessive force to it will
stop the opening operation to prevent the power back door from rapidly falling down.
Back door reserve lock function
■
This function is a function which reserves locking of all doors, beforehand, when the back
door is open. When the following procedure is performed, all the doors except the back
door are locked and then back door will also be locked at the same time it is closed.
Close all doors, except the back door.
1
Perform any of the following during the automatic closing operation of the back door.
2
• Press the lock button on the wireless remote control. (P. 110)
• Touch the lock sensor on the side door handle with carrying the electronic key on
your person. (P. 115)
• Press the back door lock button with carrying the electronic key on your person.
(P. 122)
Also, if the back door does not fully close due to the operation of the jam protection
function, etc., while the back door is automatically closing after a reserve lock opera-
tion is performed, the reserve lock function is canceled and all the doors will unlock.
Customization
■
Settings (e.g. switch operation) can be changed.
(Customizable features P. 585)
LX570_OM_OM60N01U_(U)