Table of Contents
Advertisement
wireless enable [ yes | no ]
show wireless enable
wireless closed-system [ yes | no ]
show wireless closed-system
wireless ssid string
show wireless ssid
wireless auto-channel [ off | at-startup | continuous ]
no wireless auto-channel
show wireless auto-channel
wireless default-channel [ no 1..14 ]
show wireless default-channel
wireless wep [ enable | disable ]
show wireless wep
wireless default-keyid [ 1..4 ]
show wireless default-keyid
wireless wep encpt-key [ 1..4 ] hex_string
no wireless wep encpt-key hex_string
show wireless wep encpt-key [ 1..4 ]
wireless enable [ yes | no ]
show wireless enable
These commands allow you to enable, disable, or show the status of the wireless option. When disabled, the
router will not provide or broadcast any wireless LAN services.
wireless closed-system [ yes | no ]
show wireless closed-system
These commands allow you to enable, disable, or show whether the WLAN is operating as a closed-system.
Enabling closed system mode will hide the wireless router's broadcast of the SSID, which prevents its name
from appearing on a wireless client when they scan for access points. Therefore, in order to connect, the
wireless client would already have to know the SSID. This prevents casual intrusion. Default is no.
Wireless Configuration Commands (continued)
Motorola Netopia® Router CLI Commands 2-87
Advertisement
Table of Contents
