Netopia CLI 874 Cli Reference Manual page 58

Firmware version 8.7.4
Table of Contents

Advertisement

2-46 Command Line Interface Commands Reference
interface isdn id line type { switched | leased | idsl-ascend | idsl-cmn }
show interface isdn id line type
These commands allow you set or show the ISDN interface mode: switched, leased, idsl-ascend (IDSL for
Lucent/Ascend Communications central office equipment), or idsl-cmn (IDSL for Copper Mountain Networks
central office equipment).
Example:
interface isdn 1 mode leased
show interface isdn id status [ b1 | b2 ]
This command allows you display the status of the specified ISDN/IDSL interface. For a switched ISDN
interface, you may specify the optional keyword b1 or b2, in which case the status of the specified B-channel is
displayed rather than the status of the interface itself.
For a leased ISDN/IDSL interface, the possible status strings and their meanings are:
Status String
Inactive
Waiting for rate negotiation
Backup recovery in progress
Connected at xxx Kbps
For a switched ISDN interface, the possible status strings and their meanings are:
Status String
Inactive
Active
Active, n of m SPIDs
registered
The interface is not yet active.
The interface is in the process of sensing the data rate
configured for the IDSL line at the central office. This status
applies only to an interface set to idsl-cmn mode, in which the
router can sense the data rate automatically.
The interface is in the process of recovering back to the
primary interface from a backup interface after a failure.
The interface is connected to the DSLAM or other end device at
the specified data rate. (xxx will be one of 64, 128, or 144.)
The interface is not yet active.
The interface is active, and this is an interface that does not
require SPIDs.
The interface is active, and this is an interface that requires
SPIDs. n indicates the number of SPIDs that have been
successfully registered so far, and m indicates the total
number of SPIDs to be registered. If n is less than m, the
device is still in the process of registering some of the SPIDs.
Meaning
Meaning

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netopia ent series

Table of Contents