Dhcp Option Groups Commands - Netopia CLI 874 Cli Reference Manual

DHCP Option Groups commands

ip dhcp option-group tag [ gen-option gen_option_tag ]
show ip dhcp option-group tag
no ip dhcp option-group tag [ gen-option gen_option_tag ]
interface ethernet id address-serve dhcp default-option-group option_group_tag
show interface ethernet id address-serve dhcp default-option-group
no interface ethernet id address-serve dhcp default-option-group
ip dhcp option-group tag [ gen-option gen_option_tag ]
show ip dhcp option-group tag
no ip dhcp option-group tag [ gen-option gen_option_tag ]
These commands allow you to set, display, or disable one of up to eight DHCP Option Groups. Each Option
Group can have a name of between 1 and 15 characters. The name is used in the DHCP filterset syntax to
choose what group of gen-options is to be served to a particular DHCP Client.
Option Groups refer to gen-options; they do not contain them. Deleting a gen-option from an option group does
not delete the option. Adding a gen-option to an option-group does not preclude it from being added to another
option-group.
interface ethernet id address-serve dhcp default-option-group option_group_tag
show interface ethernet id address-serve dhcp default-option-group
no interface ethernet id address-serve dhcp default-option-group
These commands allow you to set, display, or disable the option group specified by option_group_tag as the
default.
DHCP Option Groups commands
Motorola Netopia® Router CLI Commands 2-81