6-2 Getting Started Guide
Quick Easy Setup Connection Path
This section may be all you need to do to configure your Netopia 4-port ADSL Router. Your service provider will
supply you with several parameter values. Below is a handy checklist:
Trellis Coding Enabled
Fast Retrain Enabled
Data Link Encapsulation
Data Circuit VPI
Data Circuit VPI
Underlying Encapsulation
(for PPP DLEs only)
PPP Authentication:
Address Translation
Enabled:
IP Addressing:
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name
Server:
Secondary Domain Name
Server:
Default IP Gateway:
Write Access Name:
ADSL Line Configuration Screen
❑
On (default) or
❑
Off
❑
On (default) or
❑
Off
❑
RFC1483 (default) or
❑
PPP
0-255 (8 is default)
0-65535 (35 is default)
Easy Setup Profile Screen
❑
None (default) or
❑
PPPoE
❑
None (default),
❑
PAP or
❑
CHAP
❑
Yes (default) or
❑
No
❑
Numbered (default) or
❑
Unnumbered
IP Easy Setup Screen
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
Easy Setup Security Configuration Screen
_______________________
_______________________
_______________________
RFC1483 Mode:
❑
Bridged 1483 (default) or
❑
Routed 1483
(for PAP or CHAP)
User Name (or Host Name):
_______________________
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________
(192.168.1.1
255.255.255.0
are defaults)
Write Access Password:
PPP Mode:
❑
VC Multiplexed (default) or
❑
LLC SNAP
(for PAP or CHAP)
Password (or Secret):
_______________________
(for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
_______________________