Connecting Through A Telnet Session; Configuring Telnet Software - Netopia 3356-ENT Getting Started Manual

5-2 Getting Started Guide
• The System Configuration menus display and permit changing:
• IP Setup
• Filter Sets
• IP Address Serving
• Network Address Translation (NAT)
•
Date and Time
•
SNMP (Simple Network Management Protocol)
•
Security
•
Upgrade Feature Set
•
Change Device to a Bridge
•
Logging
•
The Utilities & Diagnostics menus provide a selection of seven tools for monitoring and diagnosing the
router's behavior, as well as for updating the firmware and rebooting the system.
• The Statistics & Logs menus display nine sets of tables and device logs that show information about your
router, your network, and their history.
• The Quick Menus screen is a shortcut entry point to 22 of the most commonly used configuration menus
that are accessed through the other menu entry points.
• The Quick View menu displays at a glance current real-time operating information about your router.

Connecting through a Telnet Session

Features of the Netopia 4-port ADSL Router can be configured through the Telnet screens.
Before you can access the Telnet screens, you must have:
•
A network connection locally to the router or IP access to the router.
• Telnet software installed on the computer you will use to configure the router
Configuring Telnet software
If you are configuring your router using a Telnet session, your computer must be running a Telnet software
program.