Quick Easy Setup Connection Path - Netopia 3386-ENT Getting Started Manual

6-2 Getting Started Guide

Quick Easy Setup Connection Path

This section may be all you need to do to configure your Netopia 3386-ENT Cable/DSL Router. Your service
provider will supply you with several parameter values. Below is a handy checklist:
Enable PPP over Ethernet
Address Translation
Enabled:
(if PPPoE is not enabled)
Address Translation
Enabled:
IP Addressing
Remote IP Address:
PPP Authentication
PAP User Name/
CHAP Host Name:
Local WAN IP Address:
(Numbered IP addressing
only)
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name
Server:
Default IP Gateway:
IP Address Serving:
Number of Client IP
Addresses:
1st Client Address:
Write Access Name:
WAN Ethernet Configuration Screen
Off (default) or
On
Yes (default) or
No
Easy Setup Profile Screen (only if PPPoE is enabled)
Yes (default) or
No
Unnumbered (default)
Numbered
_______________________
(127.0.0.2 is default)
PAP (default) or
CHAP
None
_______________________
_______________________
(0.0.0.0 is default)
IP Easy Setup Screen
_______________________
_______________________
_______________________
_______________________
_______________________
On (default) or
Off
_______________________
(100 is default)
_______________________
(192.168.1.100 is default)
Easy Setup Security Configuration Screen
_______________________
Local WAN IP Address
Local WAN IP Mask:
(if Local WAN IP Address is other
than 0.0.0.0)
Remote IP Mask:
PAP Password/
CHAP Secret:
Local WAN IP Mask:
(Numbered IP addressing only)
(192.168.1.1 default)
(255.255.255.0 default)
Secondary Domain Name
Server:
Write Access Password:
_______________________
(0.0.0.0 is default)
_______________________
_______________________
(255.255.255.255 is default)
_______________________
_______________________
_______________________
_______________________