Quick Easy Setup Connection Path - Netopia R7200 User Reference Manual

Quick Easy Setup connection path

This section may be all you need to do to configure your Netopia R7200 SDSL Router to connect to the Internet.
Most ISPs will supply you with several parameter values for you to enter in the router. The ISP will provide the
values shown below:
Parameter:
Data Link Encapsulation
Local WAN IP Address
Local WAN IP Mask
Default IP Gateway
Domain Name
Primary Domain Name Server
User Name
Password
(If you want to record these values, you can print this page and use the spaces above.)
If your ISP assigns your Router a Static IP address, do the following:
1. Open a Telnet session to 192.168.1.1 to bring up the Main Menu.
If you don't know how to do this, see
Alternatively, you can connect the console cable and open a direct serial console connection, using a
terminal emulator program. See
RFC1483 (default) or
PPP (optional)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
"Connecting through a Telnet session" on page
"Connecting a console cable to your router" on page
Easy Setup 7-3
Your value:
6-2.
6-3.