Quick Easy Setup Connection Path - Netopia 4652 Getting Started Manual

Quick Easy Setup Connection Path

This section may be all you need to do to configure your Netopia 4652 SDSL/IDSL Router. Your service provider
will supply you with several parameter values. Below is a handy checklist:
Line type
Data Link Encapsulation
Data Circuit VPI
Data Circuit VPI
Address Translation
Enabled:
IP Addressing:
(for PPP DLEs only)
PPP Authentication:
DSL Line Configuration Screen
SDSL-ATM (default)
or
SDSL-HDLC
or
IDSL (requires reboot)
PPP (default)
or
RFC1483
or
(for SDSL-HDLC and ISDL
Line Types only)
Frame Relay
or
(for ISDL Line Type only)
HDLC
0-255 (0 is default)
0-65535 (38 is default)
Easy Setup Profile Screen
Yes (default) or
No
Numbered (default) or
Unnumbered
None (default),
PAP or
CHAP
(for SDSL-ATM only)
Operation Mode:
PPP Mode:
VC Multiplexed (default) or
LLC SNAP
RFC1483 Mode (SDSL-ATM Line
Type only):
Bridged 1483 (default) or
Routed 1483
PPP over Frame Relay Enabled:
Off (default) or
On
_______________________
_______________________
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________
(for PAP or CHAP)
User Name (or Host Name):
_______________________
Easy Setup 6-31
Generic
Lucent
Nokia EOC Fast
Nokia Fixed
Paradyne
Nortel UE IMAS
Data Rate:
_______________________
(for Bridged 1483 only)
PPP over Ethernet (PPPoE)
Off (default) or
On
DLCI:
_______________________
LMI:
ANSI (Annex D)
CCITT (Annex A)
LMI
None
(for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
(for PAP or CHAP)
Password (or Secret):
_______________________