Fuji Xerox DocuPrint M265 z Basic User's Manual page 52

Error Message
Self-Diagnostic
Size Error 2-sided
Size mismatch
Toner Ended
Toner Low
Cause
The temperature of the
fusing unit does not rise to
a specified temperature
within the specified time.
The fusing unit is too hot.
The paper size specified in
the printer driver and the
machine's menu are not
available for automatic 2-
sided printing.
The paper in the tray is not
the correct size and is not
available for automatic 2-
sided printing.
The paper in the tray is not
the correct size.
The toner cartridge is at the
end of its life.
If the LCD displays this
message you can still print.
The toner cartridge is near
the end of its life.
Action
Press and hold to turn off the
machine, wait a few seconds, and
then turn it on again. Leave the
machine idle for 15 minutes with the
power on.
Press . Choose a paper size
supported by 2-sided printing.
Paper size available for automatic 2-
sided printing is A4.
Load the correct size of paper in the
tray and set the tray for that paper
size.
Paper size available for automatic 2-
sided printing is A4.
Load the correct size of paper in the
tray and set the size of paper to the
tray.
Replace the toner cartridge with a
new one.
Order a new toner cartridge now so
you have it ready when the LCD
displays Replace Toner.
43