This read-only window displays various Coding Profile settings.
Firmware and Configuration Update
The items on this window are described below:
Software Update Mode This specifies downloading the image file through a WAN Link or LAN Link.
♦
TFTP Server Address The IP address of the TFTP server where the runtime or configuration file is
♦
located. This entry is used only if the Firmware Update is set to Enable.
Last TFTP Server Address This is a read-only field that displays the IP address of the last TFTP server
♦
to be accessed.
Firmware Update Determines whether or not the device will try to look for a runtime image file on the
♦
TFTP server.
File Name The complete path and filename of the runtime image file on your TFTP server to be uploaded
♦
to the device.
Use Config File Toggle to Enabled to use the settings in a configuration text file when the device is reset
♦
(rebooted).
Config File Name The complete path and filename on the TFTP server for the desired configuration file.
♦
Click on the Save button at the bottom right of the window to save the settings.
Note: After finishing the Update Firmware, please Must perform Factory Reset to make sure firmware
update is complete
Coding Profile window
Update Firmware and Configuration Files window
DG-104SH VoIP Station Gateway