Update Firmware And Configuration Files - D-Link dg-104sh User Manual

DG-104SH VoIP Station Gateway
Each item on the Device Information screen is described below:
Device Type This displays the model name of this device.
♦
MAC Address This displays the MAC address of this device.
♦
Serial Number This displays the serial number of this device.
♦
Boot PROM Version This displays the version number of the device's startup code.
♦
Firmware Version This displays the version number of the device's runtime code.
♦
Hardware Revision This displays the revision number of the hardware circuitry.
♦
System Country Code This is a user-defined country code for this device. < 0:USA, 1:Japan (Default),
♦
2:Hong Kong, 3:Sweden >
System Name This is a user-defined name for this device.
♦
System Location This is a user-defined physical location of the device.
♦
System Contact This is user-defined contact information for the person or department responsible for the
♦
maintenance of this device.

Update Firmware and Configuration Files

New software can be downloaded from a TFTP server.
Use the <Tab> keys to highlight the third menu item on the Boot Menu, Update Firmware and Configuration
Files, and press <Enter>. The Update Firmware and Configuration Files screen will be displayed:
Boot Menu---Device Information screen