Factory Reset - D-Link dg-104sh User Manual

Factory Reset

Before performing a Factory Reset, be absolutely certain that this is what you want to do. Once the reset is done, all
of the device's settings stored in NV-RAM will be erased and restored to values present when the device was
purchased.
After performing the Factory Reset, make sure to redefine the IP settings for the device in the IP
Note:
Configuration menu. Then perform a Restart System on the device. After these three procedures are
performed, your Factory Reset is complete.
Click on the Reset to Factory Default button at the bottom of the window to reset the NV-RAM to the default
values that were present when you purchased the device.
Factory Reset to Default Value window
DG-104SH VoIP Station Gateway