Table of Contents
Advertisement
DG-104SH VoIP Station Gateway
♦
Gatekeeper Mode
(restarted). Choices include:
Auto Discovery – When Auto Discovery is chosen, the VoIP gateway will auto-search the Gatekeeper
from your LAN or WAN.
.Manual Discovery – When Manual Discovery is chosen, the VoIP gateway will attempt to obtain the
Gatekeeper settings from the fields located just below.
No Gatekeeper – When No Gatekeeper is chosen, the VoIP gateway will not need Gatekeeper
Gatekeeper IP Enter an IP address for the Gatekeeper.
♦
BOOTP Use the <Space> key to choose the method that the VoIP gateway will use to obtain its IP settings
♦
once it is rebooted (restarted). Choices include:
Manual – When Manual is chosen, the VoIP gateway will obtain its IP settings from the fields located
just below.
BOOTP – When BOOTP is chosen, the VoIP gateway will attempt to obtain its IP settings from a
BOOTP server located on your LAN.
DHCP – When DHCP is chosen, the VoIP gateway will attempt to obtain its IP settings from a DHCP
server located on your LAN.
IP address Enter an IP address for the VoIP gateway.
♦
Subnet mask Enter a subnet mask for the VoIP gateway.
♦
Default gateway Enter the IP address of the WAN device (usually a router) you are using to make the
♦
WAN connection.
After you have finished, press <Ctrl+S> to save changes to RAM. Next, press the <Esc> key to return to the Boot
Menu. Position the cursor over the Save Changes item and press <Enter>. This will save the settings to NV-RAM
so they will still be present after powering off or restarting the device. Make sure the Reset button on the rear panel
of the device is in the down position. Position the cursor over the Restart System item and press <Enter> for the
changes to take effect. Your VoIP is now configured for use.
Configure SNMP
This screen allows you to set an SNMP trap manager.
Use the <Space> key to choose the Gatekeeper mode once the device is rebooted
Advertisement
Table of Contents
