Config Device Ip Address - D-Link dg-104sh User Manual

Config Device IP Address

The items on this window are described below:
Restart Settings
Get IP From Choose the method the VoIP gateway will use to obtain its IP settings once it is rebooted
♦
(restarted). Choices include:
Manual – When Manual is chosen, the VoIP gateway will obtain its IP settings from the fields located
just below.
BOOTP – When BOOTP is chosen, the VoIP will attempt to obtain its IP settings from a BOOTP server
located on your LAN.
DHCP – When DHCP is chosen, the VoIP will attempt to obtain its IP settings from a DCHP server
located on your LAN.
IP Address Enter an IP address for the VoIP gateway.
♦
Subnet Mask Enter a subnet mask for the VoIP gateway.
♦
Default Gateway Enter the IP address of the WAN device (usually a router) you are using to make the
♦
WAN connection.
PPPoE Settings
State Enables or disables the PPPoE function.
♦
User Name Enter the User Name for the PPPoE function.
♦
Password Enter the Password for the PPPoE function.
♦
Click on the Save button at the bottom right of the window to save the settings.
Configure Device IP Address window
DG-104SH VoIP Station Gateway