DPN-124G
Quick Installation Guide
Initial Configuration
In order to start the Initial Configuration, go to the Initial Configuration
section.
Click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the gateway via Wi-Fi connection,
please make sure that you are connected to the wireless network of DPN-124G
(see the WLAN name (SSID) in the Default Settings section, page 3) and click
the NEXT button. Then click the START button.
If the device has not been configured previously or the default settings have
been restored, the Initial Configuration page opens automatically upon access
to the web-based interface or upon opening a web site on the Internet.
17