Setting Up The System - Denon AVR-2802 Operating Instructions Manual

Remote control unit
• For details on the functions of these parts, refer to the pages given in parentheses ( ).
LEDs (indicators) ..........................(19)
SYSTEM CALL
SYSTEM CALL buttons................(18)
SET
DVD
1
TV/DBS
Input source selector
4
buttons.........................................(20)
VCR-1
7
VCR-2/V.AUX
+10
System buttons............................(15)
VOLUME
SPEAKER select button ..............(20)
SPEAKER
DSP SIMULATION 5CH/6CH STEREO
Surround buttons .........................(21)
INPUT MODE
INPUT MODE selector
buttons.........................................(20) AUDIO
AVR/AVC VIDEO
Mode selector
TUNING
switches.......................................(15)
BAND RDS
Tuner system buttons ..................(15)
MODE
MEMORY
USE/LEARN selector
button...........................................(18)
USE/LEARN T.TONE
Test tone button...........................(24)
SYSTEM SETUP button ...............(10)
Multi source button .....................(23)
NOTES:
• The shaded buttons
(Nothing happens when they are pressed.)
• The button indicated
Remote control signal
transmitter ...................................(15)
RC-904
START LEARNED/TX
POWER
Power button ...............................(20)
CALL OFF ON / SOURCE
VDP TUNER SHIFT
2 3
PHONO
Tuner buttons...............................(15)
5 6
CDR / TAPE
CD CHANNEL
8 9
TV/VCR
0
A / B
DISC SKIP+
DOLBY / DTS
Master volume control
SURROUND DIRECT
buttons.........................................(21)
STEREO
MASTER VOL.
ANALOG EXT.IN
MUTING button ...........................(22)
TAPE CDR/MD
CD MULTI MUTING
SURROUND PARAMETER
DVD TV
button...........................................(25)
VDP VCR
SYSTEM SURROUND
SETUP PARAMETER
Channel select/enter
TITLE MENU/GUIDE
button...........................................(10)
CH SELECT
ENTER
PTY
SELECT
Cursor buttons .............................(10)
RT STATUS ON SCREEN
DISPLAY RETURN
ON SCREEN button .....................(22)
MULTI DVD
SET UP
DVD SETUP button......................(17)
STATUS button.............................(22)
do not function with the AVR-2802.
, however, can be used with the learning function.
7

SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in "CONNECTIONS"
(see pages 4 to 8), make the various settings described below on the monitor screen using the AVR-2802's
on-screen display function.
These settings are required to set up the listening room's AV system centered around the AVR-2802.
• Use the following buttons to set up the system:
TAPE CDR/MD
AUDIO CD MULTI MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
TUNING SETUP PARAMETER
TITLE MENU/GUIDE
BAND RDS
CH SELECT
ENTER
MODE PTY
SELECT
STATUS ON SCREEN
MEMORY RT
DISPLAY RETURN
USE/LEARN T.TONE MULTI DVD
SET UP
• System setup items and default values (set upon shipment from the factory)
System setup
Input the combination of speakers in your system and their
Speaker corresponding sizes (SMALL for regular speakers, LARGE for
Configuration full-size, full-range) to automatically set the composition of the
signals output from the speakers and the frequency response.
q
Crossover Set the frequency (Hz) below which the bass sound of the
Frequency various speakers is to be output from the subwoofer.
Subwoofer This selects the subwoofer speaker for playing deep bass
mode signals.
SB CH Auto Set the method of playing the surround backchannel for digital
w
Flag Detect signals.
This parameter is for optimizing the timing with which the
e
Delay Time audio signals are produced from the speakers and subwoofer
according to the listening position.
This adjusts the volume of the signals output from the speakers
r
Channel Level and subwoofer for the different channels in order to obtain
optimum effects.
Input
source
Digital In This assigns the digital input jacks for the different
t
Assignment input sources.
Digital
Inputs
This sets whether or not to display the on-screen display that
On Screen
y
appears on the monitor screen when the controls on the remote
Display
control unit or main unit are operated.
Auto Tuner FM stations are received automatically and stored in the
u
Preset memory.
SYSTEM SETUP button
Press this to display the system setup menu.
ENTER button
Press this to switch the display on the screen.
Also use this button to complete the setting on the screen.
CURSOR buttons
and : Use these to move the cursors (
0
the left and right on the screen.
and : Use these to move the cursors (• and ª) up
and down on the screen.
Default settings
Front Sp. Center Sp. SubWoofer Surround Sp.
Large Small Yes Small
80 Hz
LFE
DTS-ES / 6.1 Source Auto Flag Detect Mode = OFF
Front L & R Center Sub Woofer Surround L & R
3.6 m (12 ft) 3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft)
Surround Surround
Front L Front R Center Subwoofer
L R
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CDR
CD DVD TV/DBS VDP VCR-1
/TAPE
OPTICAL OPTICAL OPTICAL
COAXIAL OFF OFF
1 2 3
On Screen Display = ON
A1 ~ A8 87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 / 90.1 MHz
B1 ~ B8 522 / 603 / 999 / 1404 / 1611 kHz, 90.1 / 90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
ENGLISH
and ) to
1
Surround Back Sp.
Small / 1spkr
Surround Back
3.0 m (10 ft)
Surround
—
Back
0 dB —
VCR-2 —
OFF —
9