Using The Smart Wizard To Set Up Your Router - NETGEAR DG834G 54 Mbps Wireless ADSL Firewall DG834G DG834G User Manual

Wireless ADSL2+ Modem Router DG834G User Manual
• Depending on how your ISP set up your Internet account, you need to know one or more of
these settings:
– Virtual path identifier (VPI) and Virtual channel identifier (VCI) parameters
– Multiplexing method
– Host and domain names
• ASDL microfilters as explained in the NETGEAR Router Setup Manual.
• Your computer must be set up to use DHCP to get its TCP/IP configuration from the modem
router. This is usually the case. For help with DHCP, see the documentation that came with
your computer, or see the link to the online document in
Access" in Appendix
Your ISP should have provided you with all the information needed to connect to the Internet. If
you cannot locate this information, you can ask your ISP to provide it.

Using the Smart Wizard to Set Up Your Router

For first-time installation of your modem router, refer to the NETGEAR Router Setup Manual. The
Setup Manual explains how to launch the NETGEAR Smart Wizard on the Resource CD to step
you through the procedure to connect your router, modem, and computers. The Smart Wizard will
assist you in configuring your wireless settings and enabling wireless security for your network.
After initial configuration using the Setup Manual, you can use the information in this Reference
Manual to configure additional features of your wireless router.
For installation instructions in a language other than English, see the language options on the
Resource CD.
Note: The Smart Wizard cannot detect a PPTP connection with your ISP. If your ISP uses
this protocol, then you must configure your connection manually (see
Manually Configuring Your ISP Settings" on page
1-2
C.
v1.0, May 2008
"Preparing a Computer for Network
1-6).
Configuring Your Internet Connection
"Viewing or