NETGEAR DG834G 54 Mbps Wireless ADSL Firewall DG834G DG834G User Manual page 160

Wireless ADSL2+ Modem Router DG834G User Manual
d. Click Show Status. The resulting screen should show Update OK: good:
Figure B-11
4. Configure the DG834G v5 as in the gateway-to-gateway procedures using the VPN Wizard
(see "Setting Up a Gateway-to-Gateway VPN Configuration" on page
use appropriate network addresses for the environment.
The LAN addresses used in this example are as follows:1
Device
DG834G v5
FVL328
a. Enter toFVL328 for the connection name.
b. Enter fvl328.dyndns.org for the remote WAN's IP address.
c. Enter the following:
• IP Address: 172.23.9.1
• Subnet Mask: 255.255.255.0
5. Configure the FVL328 as in the gateway-to-gateway procedures for the VPN Wizard (see
"Setting Up a Gateway-to-Gateway VPN Configuration" on page
appropriate network addresses for the environment.
a. Enter toDG834 for the Connection Name.
b. Enter dg834g.dyndns.org for the remote WAN's IP address.
c. Enter the following:
• IP Address: 10.5.6.1
• Subnet Mask: 255.255.255.0
B-10
LAN IP Address LAN Subnet Mask
10.5.6.1 255.255.255.0
172.23.6.1 255.255.255.0
v1.0, May 2008
6-18), being certain to
6-18), being certain to use
NETGEAR VPN Configuration