NETGEAR DG834G 54 Mbps Wireless ADSL Firewall DG834G DG834G User Manual page 113

Set the LAN IPs on each DG834Gv5 to different subnets and configure each properly for the
Internet. The examples below assume the following settings:
Table 6-4. VPN Tunnel Configuration Worksheet
Connection Name:
Pre-Shared Key:
Secure Association -- Main Mode or Manual Keys:
Perfect Forward Secrecy -- Enabled or Disabled:
Encryption Protocol -- DES or 3DES:
Authentication Protocol -- MD5 or SHA-1:
Diffie-Hellman (DH) Group -- Group 1 or Group 2:
Key Life in seconds:
IKE Life Time in seconds:
VPN Endpoint
DG834Gv5_A
DG834Gv5_B
Note: The LAN IP address ranges of each VPN endpoint must be different. The
connection will fail if both are using the NETGEAR default address range of
192.168.0.x.
To configure a gateway-to-gateway VPN tunnel using the VPN Wizard:
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834G User Manual
Local IPSec ID LAN IP Address
GW_A 192.168.0.1
GW_B 192.168.3.1
v1.0, May 2008
GtoG
12345678
Main
Disabled
3DES
SHA-1
Group 2
28800 (8 hours)
3600 (1 hour)
FQDN or Gateway IP
Subnet Mask (WAN IP Address)
255.255.255.0 14.15.16.17
255.255.255.0 22.23.24.25
6-19