NETGEAR DG834G 54 Mbps Wireless ADSL Firewall DG834G DG834G User Manual page 108

Wireless ADSL2+ Modem Router DG834G User Manual
f. Click Enter Key. Enter the DG834Gv5 pre-shared key, and then click OK. In this
example, 12345678 is entered. This field is case-sensitive.
5. Configure the VPN Client Authentication Proposal.
In this step, you provide the type of encryption (DES or 3DES) to be used for this connection.
This selection must match your selection in the DG834Gv5 configuration.
a. In the Network Security Policy list on the left side of the Security Policy Editor window,
expand the Security Policy heading by double-clicking its name or clicking the + symbol.
b. Expand the Authentication subheading by double clicking its name or clicking the +
symbol. Then select Proposal 1 below Authentication.
Figure 6-13
c. In the Authentication Method drop-down list, select Pre-Shared key.
d. In the Encrypt Alg drop-down list, select the type of encryption that is configured for the
Encryption Protocol in the DG834Gv5 in
Triple DES.
e. In the Hash Alg drop-down list, select SHA-1.
f. In the SA Life drop-down list, select Unspecified.
g. In the Key Group drop-down list, select Diffie-Hellman Group 2.
6. Configure the VPN client key exchange proposal.
6-14
Table 6-3 on page
v1.0, May 2008
6-6. In this example, use
Virtual Private Networking