NETGEAR DG834G 54 Mbps Wireless ADSL Firewall DG834G DG834G User Manual page 166

Wireless ADSL2+ Modem Router DG834G User Manual
Figure B-17
c. Select Secure in the Connection Security check-box group.
d. Select IP Subnet in the ID Type drop-down list.
e. In this example, type 192.168.0.1 in the Subnet field as the network address of the
DG834G v5.
f. Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the DG834G v5.
g. Select All in the Protocol drop-down list to allow all traffic through the VPN tunnel.
h. Select the Connect using Secure Gateway Tunnel check box.
i. Select Domain Name in the ID Type drop-down list, and enter fromDG834G.com (in
this example).
j. Select Gateway Hostname and enter ntgr.dyndns.org (in this example).
k. The resulting connection settings are shown in
3. Configure the Security Policy in the ADSL2+ Modem Wireless Router software.
a. In the Network Security Policy list, expand the new connection by double-clicking its
name or clicking on the + symbol. My Identity and Security Policy appear below the
connection name.
B-16
Figure B-17.
v1.0, May 2008
NETGEAR VPN Configuration