Installing Your Router Using The Smart Wizard; Using The Smart Wizard - NETGEAR DG834Gv3 Setup Manual

To use the Smart Wizard, you must be using a PC with Windows Vista, or Windows 2000 or
Windows XP with Service Pack 2. The Smart Wizard setup procedure should take about 15
minutes to complete. Before using the Smart Wizard to set up your router, ensure that:
• You have an ADSL Internet service connection through an Internet Service Provider (ISP).
• You have the configuration information provided by your ISP.

Using the Smart Wizard

The NETGEAR Smart Wizard takes you through the procedure to connect your router, ADSL
microfilters, and PC(s). It then helps you to configure your wireless settings and enable wireless
security for your network. The Smart Wizard guides you through the setup process by automating
many of the steps. At each step in the setup process, the Smart Wizard checks to ensure that the
steps you perform are successfully completed.
To install your router using the Smart Wizard:
Locate the ADSL settings information provided by your Internet Service Provider.
1.
Insert the Resource CD into your Windows PC. The CD will automatically start and detect the
2.
language you are using on your PC. Select a different language option, if you prefer.
If the CD does not automatically start, browse the CD and double-click
When the Welcome screen appears, click Setup to start the Smart Wizard. Follow the
3.
instructions and prompts to complete the installation.
The Smart Wizard guides you through installing your router, connecting your router to the
Internet, configuring your wireless network settings, and selecting the optimum security
protection for your network. If you choose not to select a security option during installation,
Installing Your Router Using the
Smart Wizard
.
9