NETGEAR DG834G 54 Mbps Wireless ADSL Firewall DG834G DG834G User Manual page 67

This following table explains the statistic fields.
Table 4-2. Router Statistics Fields
Field
WAN (Internet), Status
LAN, or WLAN
TxPkts
(Wireless LAN)
statistics
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
ADSL Link Connection Speed
Downstream or
Upstream
Line Attenuation
These statistics
might help your
Noise Margin
technical support
representative if
there is a connection
Poll Interval
problem.
Viewing Connection Status
Click the Connection Status button on the Router Status screen to view the connection status:
Figure 4-5
Managing Your Network
Wireless ADSL2+ Modem Router DG834G User Manual
Description
The link status of the port.
The number of packets transmitted on this port since reset or
manual clear.
The number of packets received on this port since reset or
manual clear.
The number of collisions on this port since reset or manual
clear.
The average egress line utilization for this port.
ingress line utilization
The average
The time elapsed since the last power cycle or reset.
Typically, the downstream speed is faster than the upstream
speed.
The line attenuation increases the further you are physically
located from your ISP's facilities.
This is the signal-to-noise ratio and is a measure of the quality
of the signal on the line.
Specifies the interval at which the statistics are updated in this
window. Click Stop to freeze the display.
v1.0, May 2008
for this port.
4-7