NETGEAR DG834G 54 Mbps Wireless ADSL Firewall DG834G DG834G User Manual page 115

3. Fill in the connection name and pre-shared key fields. Select the radio button for the type of
target end point, and then click Next to proceed. The Step 2 of 3 screen displays:
Figure 6-22
4. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and then click
Next. The Step 3 of 3 screen displays:
Figure 6-23
5. Fill in the IP Address and Subnet Mask fields for the target endpoint that can use this tunnel,
and then click Next.
Virtual Private Networking
Wireless ADSL2+ Modem Router DG834G User Manual
Enter the WAN IP address of the
remote VPN gateway: (for example,
22.23.24.25)
Enter the LAN IP settings of the remote
VPN gateway:
• IP Address (for example, 192.168.3.1)
• Subnet Mask (for example, 255.255.255.0)
v1.0, May 2008
6-21