Answering Calls - Nortel 1210 User Manual

42
METHOD
From Redial list
From Phone book
From Call Logs
Manually entering number
Note: When there is Dial Plan configured on your phone, the call is placed as
soon as the phone recognizes a valid phone number.
You may also make calls by using your IP Phone's Web Interface on your PC.
For this, you need to access the website on the telephone's built-in web server
using a web browser on a computer that is on the same network as your
telephone and then click on the Dial tab. You can make calls by either entering
IP address of the phone you wish to call or its phone number and clicking Dial
(your phone may be either off-Hook or on-hook, as long as it is not in a call). For
hanging up, simply click Goodbye. The Dial web page looks as follows:

Answering Calls

Upon receiving an incoming call, the LED on the top of the phone starts to blink
red (if so configured), along with a change in the specific line icon on which the
call is received
following ways:
When unregistered - Redial > Up/Down > Dial
softkey / Redial Feature Key
When registered - Redial > Up/Down > Dial Softkey /
Line Key / Redial Feature Key
When unregistered- Book > Up/Down > Dial softkey
When registered - Book > Up/Down > Line Key / Dial
When unregistered - Services key > Logs > In / Out /
Miss > Dial softkey
When registered - Services key > Logs > In / Out /
Miss > Dial softkey / Line Key
When unregistered - not possible (only URI dialing)
When registered - Enter number > Line Key / Dial
(blinking). An incoming call may be answered in one of the
PROCEDURE
IP Phone 1200 SIP User Guide