Ordinary Sewing Setting Mode - Janome Skyline S7 Instruction Book

!0 Background Color
You can select from the colorful wallpapers for the
background of the visual touch screen by pressing the
relevant icon.
!0
!1 Reset All to Defaults
Press the Yes key to reset all the parameters to the
original values (factory settings).
!1
Press the OK key to register the new settings.

Ordinary Sewing Setting Mode

q Auto thread tension
You can adjust the auto thread tension level by pressing
the "+" or "–" key.
w Needle stop position
The machine always stops with the needle in the down
position except when sewing buttonholes, specialty
stitches, monograms, etc. However you can change the
needle stop position to up by pressing the needle up key.
q
NOTE:
The machine stops with the needle in the down
position if Foot-up key option is turned on, even if the
needle stop position is set to up position.
w
Press the next page key to show the next menu.
89