Removing And Attaching The Foot Holder - Janome Skyline S7 Instruction Book

q
e
t
r
t

Removing and Attaching the Foot Holder

Remove the foot holder before using the dual feed foot or
darning foot.
Always make sure to press the lockout key to lockout
the machine before replacing the foot holder.
w
Removing the foot holder
Raise the needle by pressing the needle up/down button.
Press the lockout key and raise the presser foot with the
presser foot lifter.
q Needle up/down button
w Lockout key
e Presser foot lifter
Loosen the setscrew and remove the foot holder.
r Setscrew
t Foot holder
Attaching the foot holder
Attach the foot holder to the presser bar from the rear.
y
Tighten the thumbscrew securely with the screwdriver.
y Presser bar
r
18
CAUTION: