Table of Contents
Advertisement
w
e
r
u
i
t
y
t
q
o
!0
MONOGRAMMING
You can program letters and symbol designs for
monogramming.
Press the Monogram key and the font selection window
will open.
You can select one of 3 fonts*.
Select the desired font by pressing the corresponding
key.
q Monogram key
w Block font key
e Script font key
r Block font (9 mm) key
The monogram mode window will open.
NOTE:
• The height of Block font (9 mm) is approximately 9
mm.
* If you select Russian or Japanese language for
the visual touch screen, you can select Cyrillic
alphabets or Japanese font as well.
Function Keys
t Cursor key
Press the cursor key to move the cursor up or down.
y Edit box
Press the edit box to view the entire monogram.
u Letter size key
Press this key to select the full size (L) or small size (S).
i Letter case key
Press this key to select the upper case or lower case.
o Delete key
Press this key to delete the selected character or symbol.
!0 File save key
Press this key to save the monogram as a data file.
NOTE:
Numbers, symbols and European letters are available
on pages 2/5 through 5/5.
62
Advertisement
Table of Contents
