Hand-Look Quilt Stitches; Variable Zigzag; Maximum Zigzag Width Adjustment - Janome Skyline S7 Instruction Book

q-M q-L
w-L
w-M
e-M
t
r
r

Hand-look Quilt Stitches

Use a transparent nylon thread for the needle and
ordinary sewing thread for the bobbin.
The bobbin thread is pulled up on the right side of the
fabric and the stitches will look as if sewn by hand.

Variable Zigzag

This unique feature allows you to control zigzag width
with the knee lifter.
Select q-M or q-L, using the darning foot PD-H for
sewing quilt layers. Drop the feed dog. Guide the fabric
e-L
with your hands while sewing.
Select w-M or w-L, using the clear view free quilt foot
QV for sewing flat and firm fabrics. Drop the feed dog.
Guide the fabric with your hands while sewing.
Select e-M or e-L, using the satin stitch foot for sewing
variable zigzag stitches.
The fabric is fed by the feed dog and the stitch width can
be varied with the knee lifter.
Attach a stabilizer to the wrong side of the fabric if
needed.
Sew at slow to medium speed while guiding the fabric
with your hands and controlling the stitch width with your
knee.
NOTE:
When the machine stops, you can raise and lower the
presser foot with the knee lifter.
Purple tip needle is recommended for free motion
quilting to prevent skipped stitch.

Maximum Zigzag Width Adjustment

The maximum zigzag width can be limited to suit your
sewing needs.
Press the "+" or "–" key beside the maximum zigzag
width setting r to limit the maximum zigzag width to your
preference.
For the variable zigzag stitches with the satin stitch foot,
press the setting bar t to open the maximum zigzag
width setting.
r Maximum zigzag width setting
t Setting bar
85