REMOVING THE OVEN APPLIANCE MANAGER
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug oven or disconnect power.
WARNING
Excessive Weight Hazard
Use two or more people to move and
install oven.
Failure to do so can result in back or
other injury.
2.
Remove the oven from its mounting location
(see "Installation Information" in Section 2)
and pull it forward so that you can access
the top cover.
3.
Remove the six screws from the top cover
and remove conduit screw and remove
Screws (3 of 6)
4.
Unhook and remove the AC wiring conduit
connector from the back of the cover (see
the top right photo).
Top Cover
Continued on the next page.
4-3
Conduit Screw