Removing And Replacing An Oven Door - KitchenAid KEBS276X Use And Care Manual

Electric 27" and 24" built-in double self-cleaning ovens
Hide thumbs Also See for KEBS276X:
Table of Contents

Advertisement

Optional Oven Door
Fronts
The front door glass can be
changed to match your kitchen
decor. The following front kits are
available from your KitchenAid
dealer: White Glass 24" (Kit No.
3179502), White Glass 27" (Kit No.
3179501], Almond Glass 24" (Kit
No. 3179504} and Almond Glass
27" (Kit No.
3179503). Two kits are
required for a double oven. These
kits include easy installation
instructions.
Removing and Replacing
an Oven Door
Both oven doors can be removed to
change optional oven door fronts.
Do not remove them for cleaning.
A WARNING
Personal Injury Hazard
* Oven doors are heavy. Use
both hands to remove the
oven doors.
* Grasp only the sides of the
oven door. Do not use any
portion of the front frame
or trim for lifting.
Failure to grasp the oven
door properly could result in
personal injury or product
damage.
Screw
To remove:
1. Open the door completely.
2. Remove the two screws just
above the oven door hinges.
3. Close door to the Broil Stop
position (door will be open about
6 inches).
4. Hold the door firmly on both
sides. Pull forward slightly, lift the
door up and out of the hinge
slots to remove. Set the door
aside.
To replace:
1. Grasp door firmly on both sides.
Slide the hinge slot in the bottom
of the door over the hinges.
Push the door down and in to
replace.
2. Open the door slightly past the
Broil Stop position and push it
down to make sure the door is
completely installed.
3. Open the door completely.
Replace the two oven door
Screws.
4. Close and open the door slowly
to make sure it is replaced
properly.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kebs246x

Table of Contents