Cabinet Dimensions; Electrical Connection; Electrical Requirements - KitchenAid KEBK171SSS Technical Education

27" & 30" electric built-in single oven
Hide thumbs Also See for KEBK171SSS:
Table of Contents

Advertisement

Cabinet Dimensions

27˝ (68.6 cm) and 30˝ (76.2 cm) Ovens
F
E
27" (68.6 cm) models
A. 27" (68.6 cm) min. cabinet
width
B. 1" (2.5 cm) top of cutout to
bottom of upper cabinet door
32
C.
" (81.3 cm) bottom of cutout
to floor
�⁄�
" (64.8 cm) cutout width
D. 25
E. 1
�⁄�
" (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 27
�⁄�
" (70.5 cm) cutout height
Cabinet Side View
A
B
E
D
A. 23-1/4˝ (59.1 cm) min. cutout depth
B. 23˝ (58.4 cm) recessed oven depth
C. Oven front
D. Recessed oven
E. Cabinet

ELECTRICAL REQUIREMENTS

If codes permit and a separate ground wire is
used, it is recommended that a qualified elec-
trical installer determine that the ground path
and wire gauge are in accordance with local
codes.
A
B
D
C
30" (76.2 cm) models
30
A.
" (76.2 cm) min. cabinet
width
B. 1" (2.5 cm) top of cutout to
bottom of upper cabinet door
32
C.
" (81.3 cm) bottom of
cutout to floor
D. 28
�⁄�
" (72.4 cm) cutout width
E. 1
�⁄�
" (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 27
�⁄�
" (70.5 cm) cutout height
C
Check with a qualified electrical installer if you
are not sure the oven is properly grounded.
This oven must be connected to a grounded
metal, permanent wiring system.
Be sure that the electrical connection and
wire size are adequate and in conformance
with the National Electrical Code, ANSI/NFPA
70-latest edition or CSA Standards C22.1-94,
Canadian Electrical Code, Part 1 and C22.2
No. O-M91-latest edition, and all local codes
and ordinances.
A copy of the above code standards can be
obtained from:
National Fire Protection Association
One Batterymarch Park
Quincy, MA 02269
CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575

Electrical Connection

To properly install your oven, you must deter-
mine the type of electrical connection you will
be using and follow the instructions provided
for it here.
Oven must be connected to the proper elec-
trical voltage and frequency as specified on
the model/serial number rating plate. The
model/serial number rating plate is located
at the bottom of the right-hand mounting rail.
See the following illustration.
Single Oven
A. Model/serial number plate
2-2
A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents