Complete Installation - KitchenAid KEBK171SSS Technical Education

4. Securely fasten oven to cabinet using the
#8-14 x 1˝ screws (2 for single oven, 4 for
double oven) provided. Insert the screws
through holes in mounting rails. Do not
overtighten screws.
A
B
A. Mounting rail
B. Insert #8-14 x 1" screw.
5. On some models, the oven vent is taped
to the side of the oven.
With one #8-14 x 3/8˝ screw for each side
of the vent, fasten vent securely to the
oven.
A
A. #8-14 x 3/8 ˝ screw
B. Oven vent
6. Replace oven racks.
7. Replace oven door by inserting ends of
hinges into hinge slots in the oven frame.
8. Push hinges in as far as they will go and
open the oven door. You should feel the
oven door drop into place.
9. Rotate both hinge latches back to the locked
position.
10. Check that the door is free to open and
close. If it is not, repeat the removal and
installation procedures. See "Remove
Oven Door," page 2-4.
B
11. Reconnect power.
12. Display panel will light briefly, and "PF"
should appear in the display.
13. If display panel does not light, please refer-
ence the "Assistance or Service" section
of the Use and Care Guide or contact the
dealer from whom you purchased your
oven.

COMPLETE INSTALLATION

1. Check that all parts are now installed. If
there is an extra part, go back through the
steps to see which step was skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. For oven use and cleaning, read the Use
and Care Guide.
Check Operation of Single Oven
1. Turn power on.
2. When "CLOCK ENTER TIME" appears in
the lower oven display touch START.
3. Touch BROIL.
4. Touch START.
If oven does not operate, check the fol-
lowing:
• Household fuse is intact and tight; or
circuit breaker has not tripped.
• Electrical supply is connected.
• See "Troubleshooting" section in the Use
and Care Guide.
5. When oven has been on for 5 minutes,
feel for heat. If you do not feel heat or if
an error code ("F" followed by a number
plus "E" followed by a number) appears in
the display, turn off the oven and contact
a qualified technician.
6. Touch OVEN OFF.
If you need Assistance or Service:
Please reference the "Assistance or Ser-
vice" section of the Use and Care Guide
or contact the dealer from whom you pur-
chased your built-in oven.
2-7