Husky H1504FK-R Operator's Manual page 14

Operating air powered tools requiring up to 2.8 SCFM.
Ensure tank drain is closed. Ensure tank drain is closed.
Turn regulator knob counter clockwise until outlet Turn regulator knob counter clockwise until outlet
pressure is at zero (0). pressure is at zero (0).
Ensure power switch is in the OFF (0) position and air Ensure power switch is in the OFF (0) position and air
compressor is unplugged.
compressor is unplugged.
If not ready installed, attach hose to compressor as If not ready installed, attach hose to compressor as
previously instructed. previously instructed.
Connect other end of hose to the tool of intended use.
Connect other end of hose to the tool of intended use.
Turn the switch ON (I) and allow tank pressure to build.
THREAD
SEALING
TAPE
HOSE WITH QUICK
COUPLER ATTACHED
SEALING
could cause serious injury and may
permanently damage the tool.
14
PNEUMATIC TOOL
Note:
THREAD SEALING TAPE
USE THREAD SEALING TAPE
1/4 in. NPT
MALE CONNECTOR
THREAD
TAPE