Play Mode - Sony RM-LVR2 How To Use Manual

[16] How to use
List of setting items
You can display and change the settings by pressing the MENU button while the camera and remote
control are connected via Wi-Fi.
There are shooting modes that cannot be set depending on the connected camera or selected
shooting mode. Refer to the instruction manual of the camera.
Disconnect
Disconnects the Wi-Fi connection and returns to the Wi-Fi device selection screen.
Device registration
Registers a camera to connect to this unit for the multi connection.
*2

Play Mode

Plays and deletes images using this unit.
Shooting Mode
Switches between the movie mode, photo mode, interval photo recording mode, loop
recording mode or audio recording mode.
The setting items of the camera
Movie settings
The items listed below can be set in the movie mode.
Image quality setting: Sets the image resolution and frame rate for shooting movies.
Movie format: Selects the movie format.
SteadyShot: Activates the camera-shake reduction when shooting.
Field angle setting: Sets the field angle setting of the camera.
Flip: Records the image upside down.
Scene: Sets an image quality suitable for scenes.
White balance: Adjusts the white balance according to your preference.
AE shift: Adjusts the exposure according to your preference.
Color mode: Sets the image color tone.
Audio recording setting: Selects the sound recording setting.
Wind noise reduction: Sets to cut low-range wind noise according to the noise level when
recording using the built-in microphone.
Still image settings
The items listed below can be set in the photo mode.
Field angle setting: Sets the field angle setting of the camera.
Flip: Records the image upside down.
Scene: Sets an image quality suitable for scenes.
White balance: Adjusts the white balance according to your preference.
AE shift: Adjusts the exposure according to your preference.
Changing the Settings
*1
List of setting items
*2