Playing Back - Sony RM-LVR2 How To Use Manual

1. Press the MENU button.
The list of setting items is displayed.
2. Press the UP button or DOWN button to select
mode) and press the REC/ENTER button.
3. Press the UP button or DOWN button to select the following setting, then press the REC/ENTER
button.
: Disables the Wi-Fi function.
(default): Enables the Wi-Fi function.
Note
You cannot set this setting while the unit is connected to the camera via Wi-Fi.
[47] How to use
Network reset settings
The multi connection network settings can be reset.
1. Press the MENU button.
The list of setting items is displayed.
2. Press the UP button or DOWN button to select
network settings) and press the REC/ENTER button.
3. Press the UP button or DOWN button to select
When you set the multi connection after finishing the reset, you are required to register devices
once again even if they have been already registered.
If (Back) is selected on the confirmation screen, the resetting is canceled.
Note
You cannot reset the network setting in single connection mode.
To return to the setting item selection screen from the setting value selection screen, select
(Back).
To apply the setting or value selected on the selection screen, select
[48] How to use
Playing back images
Changing the Settings
Viewing Playing back images
(Remote control settings) -
Remote control settings
(Remote control settings) -
, then press the REC/ENTER button.
(Airplane
(Reset
.