Table of Contents
Advertisement
Presetting the time code/user bit
Press the UP button or DOWN button to select the value, then press the REC/ENTER button.
When the above operation is performed 4 times, the four 2-digit numbers are set and switches to Live-
View display.
The time code can be selected within the following range.
When selecting 30p or 60p
00:00:00:00 (default) - 23:59:59:29
When selecting 25p or 50p
00:00:00:00 (default) - 23:59:59:24
When selecting 24p
00:00:00:00 (default) - 23:59:59:23
You can set the last 2 time code digits of the frames in multiples of 4, between 0 and 23.
The user bit can be selected within the following range.
00:00:00:00 (default) -FF:FF:FF:FF
Setting items of the time code
You can set the items below.
TC FORMAT
: Records the time code in drop frame.
: Records the time code in non-drop frame.
When the TV system is set to [PAL], the format is not displayed since the time code is fixed to [NDF].
TC RUN
: The time code advances sequentially, regardless of the operation of the camera.
: The time code advances only while recording XAVC S movies, and it starts recording
sequentially from the time code of the last recorded image.
TC MAKE
: The new set-up time code is recorded on recording media.
: The last time code of the previous recording is read out from the recording media and
the new time code is recorded sequentially from the last time code.
Setting items of the user bit
You can set the items below.
UB TIME REC
: Records the time as the user bit.
: Does not record the time as a user bit.
To reset the settings
All of the values are set to 00 if you press the DISP button while selecting [TC PRESET] or [UB PRESET]. All
of the values can be reset if you press the REC/ENTER button again.
Note
Time code/user bit can be set only for the movie mode.
When this unit is not connected to the camera via Wi-Fi, the camera settings cannot be changed.
To return to the setting item selection screen from the setting value selection screen, select
To apply the setting or value selected on the selection screen, select
Hint
About the time code
Time code is a useful function for advanced image editing, which records
hours/minutes/seconds/frames on the image data.
.
.
Advertisement
Table of Contents
