Sony RM-LVR2 How To Use Manual page 53

[69] Troubleshooting
Cannot charge this unit.
Turn off this unit and make the USB connection.
Disconnect the micro USB cable (supplied), and then reconnect it.
Use the micro USB cable (supplied).
Charge the battery pack in an ambient temperature of 10°C to 30°C (50°F to 86°F).
Turn on the computer and connect this unit.
Release the computer from sleep or hibernation status.
Connect the micro USB cable (supplied) directly to the USB connector of the computer.
[70] Troubleshooting
The remaining charge indicator is incorrect.
This phenomenon occurs when you use this unit in an extremely hot or cold location.
A discrepancy arises between the remaining charge indicator and the actual remaining battery charge.
Fully discharge the battery pack once, then charge it to correct the indication.
Fully charge the battery pack again. If the problem persists, the battery pack is worn out. Consult your
nearest Sony dealer.
[71] Troubleshooting
View Remote
Error display on the Live-View Remote
If the following messages appear, follow the instructions.
01-01/02-02
Failed to connect the camera to this unit.
Signal traffic may be heavy or this unit may be too far from the access point.
01-02
Failed to connect the camera to this unit.
Follow the steps in "Connecting this unit to a camera via Wi-Fi (Single connection)" or "Connecting
this unit to multiple cameras via Wi-Fi (Multi connection)."
01-03/01-04
Failed to connect the camera to this unit.
The camera is not compatible.
03-01/03-02
Failed to connect the camera to this unit.
Troubleshooting
Troubleshooting
Warning indicators and error messages
Cannot charge this unit.
The remaining charge indicator is incorrect.
Error display on the Live-