Image Quality - Sony RM-LVR2 How To Use Manual

You can connect up to 5 cameras at the same time with the multi connection.
There are shooting modes that cannot be set depending on the connected camera. Refer to the
instruction manual of the camera.
You can press the UP/DOWN buttons of this unit to move the cursor and switch the Live-View display
on the LCD screen of this unit to the display of any of the connected cameras.
Press the REC/ENTER button of this unit to start recording on all connected cameras.
Operates according to the shooting mode of the connected camera.
To stop the movie mode, interval photo recording mode, or loop recording mode, press the
REC/ENTER button of this unit again.
Note
The operation command from this unit under multi camera control is sent to all connected cameras.
This unit can do the following. Other camera settings such as image quality etc. should be done on
the camera.
Change the recording mode
Start and stop the movie mode, interval photo recording mode, or loop recording mode
Operate the shutter to shoot still images
The reaction time of the connected cameras may differ depending on the situation of each camera.
There may be a time lag between the connected cameras when starting recording, etc.
If one or more of the connected cameras are recording, the REC/Wi-Fi lamp lights up red.
If you press the REC/ENTER button of this unit at this time, the command to stop recording is sent to
all the connected cameras.
[15] How to use
Button hold function
This function prevents you from accidentally pressing this unit's buttons while carrying it around.
Press the MENU button for 2 seconds or more to set the button hold function.
In the button hold mode,
DISP button, UP button and DOWN button of this unit are disabled.
To cancel the button hold mode, press the MENU button for 2 seconds or more, or press the ON/OFF
(Power) button to turn off the power of this unit.
Note
The button hold function is only available when this unit is connected to a camera via Wi-Fi. When not
connected, the button hold function cannot be used.
The button hold function cannot be used while the MENU item is displayed.
When the Wi-Fi connection between this unit and the camera is disconnected, the button hold
function is canceled.
Shooting Shooting movies and still images
appears on the LCD screen of this unit. The REC/ENTER button,