Resetting The Connection Information Of The Registered - Sony RM-LVR2 How To Use Manual

Note
Register cameras before connection standby mode of this unit is canceled.
The multi camera control function is only available with the compatible cameras.
When operating a camera that does not support the multi camera control function, set the connection
mode to
You cannot copy images recorded in the camera to this unit.
The WPS method is used for connecting the Live-View Remote to multiple cameras. If there is
another device using the WPS method in the vicinity of the cameras, the registration may fail. If the
registration fails, reconnect by performing each step again.
[11] How to use
(Multi connection)

Resetting the connection information of the registered

camera
This function is only available when the camera is in multi connection.
1. Press the MENU button.
The list of setting items is displayed.
2. Press the UP button or DOWN button to select
network settings) and press the REC/ENTER button.
3. Press the UP button or DOWN button to select
button.
[12] How to use
Switching shooting modes
Switch the shooting mode by pressing the UP/DOWN button on the Live-View display of this unit during
single connection.
Some shooting modes cannot be set depending on the connected camera. Refer to the instruction
manual of the connected camera.
The shooting mode icon is displayed on the upper left side of the display.
(Single connection).
Getting Started
Shooting Shooting movies and still images
Connecting this unit to multiple cameras via Wi-Fi
(Remote control settings) -
or (Cancel) and press the REC/ENTER
(Reset