Dirt Devil Infinity V12 Operating Manual page 28

02_Infinity_gb.book Seite 28 Donnerstag, 29. Januar 2009 12:56 12
2 Unpacking and connecting
1
a
b
28
WARNING:
Only assemble the nozzles if the plug has been removed
from the socket. The cylinder vacuum cleaner could be
switched on by accident.
Proceed as follows to attach the nozzles:
1. Switch the appliance off and pull the plug out of the
socket.
2. Remove the nozzle from the telescopic tube (Fig. 9/1).
3. When required, push the desired nozzle onto the lower
end of the telescopic tube or the handle (Fig. 9).
ATTENTION:
If you use the cylinder vacuum cleaner without an
attached nozzle, there is a greater risk of accidently
vacuuming up objects.
Fig. 9
4. As illustrated, secure the nozzles no longer required
onto the accessories mount, as far as this is possible.
- Push the 2-in-1 combi-nozzle into the accessories
mount (Fig. 10/a).
- Push the crevice nozzle onto the accessories mount
and attach it so it clicks audibly and noticeably into
place (Fig. 10/b).
5. Keep the other nozzles safe and inaccessible to
children.
Fig. 10