Operation Manual; Names Of Parts - Daikin CTXU25G2V1B Service Manual

SiBE12-908

3. Operation Manual

3.1

Names of Parts

Name of Parts
Indoor Unit
1.Air filter
2.Titanium apatite photocatalytic
air-purifying filter:
• These filters are attached to the inside of the air
filters.
3.Air inlet
4.Front panel
5.Panel tab
6.Room temperature and humidity
sensors:
• It senses the air temperature and humidity around
the unit.
7.INTELLIGENT EYE sensor: (page 15.)
8.Control panel
9.Air outlet
10.Flaps (horizontal blades): (page 10.)
11.Louvers (vertical blades):
• The louvers are inside of the air outlet. (page 10.)
12.Air supply filter (gray)
13.Indoor Unit ON/OFF switch: (page 8.)
• Push this switch once to start operation.
Push once again to stop it.
• The operation mode refers to the following table.
Mode Temperature setting
AUTO
• This switch is useful when the remote controller is
missing.
14.Multi-monitor lamp: (page 8.)
• The lamp color changes according to the
operation.
• AUTO............................................. Blue/Red
• DRY ...............................................Green
• COOL............................................. Blue
• HEAT .............................................Red
• FAN................................................ White
15.TIMER lamp (yellow): (page 19.)
16.INTELLIGENT EYE lamp (green): (page 15.)
17.Signal receiver:
• It receives signals from the remote controller.
• When the unit receives a signal, you will hear a
short beep.
• Operation start ............................... beep-beep
• Settings changed ......................... beep
• Operation stop ............................. beeeeep
Outdoor Unit
18.Air inlet: (Back and side)
19.Refrigerant piping, humidifying hose and
inter-unit cables
20.Drain hoses
21.Earth terminals:
• It is inside of this cover.
22.Air outlet
23.Humidifying hoses
24.Humidity unit
4
Installation / Operation Manual
Airflow rate
25°C AUTO
Indoor Unit
1 2 3
12 10 11
Outdoor Unit
18
24
22

Operation Manual

4
9 6
8
17 15
14
16
13
23
21
5
7
19
20
80