Cord Tangling - Polaris 9350 Owner's Manual

3
F igu r e 2 5 . R e m o v e F ilt e r C a nist e r A sse m b ly
7. Push the quick release button on the canister
assembly (4) and pull open the filter assembly
(5), as shown in Figure 26.
F igu r e 2 6 . O p e n F ilt e r C a nist e r A sse m b ly
8. Separate the filter canister from the filter
support (6), as shown in Figure 27.
F igu r e 2 7 . R e m o v e F ilt e r C a nist e r
9. Empty all debris from the filter canister, then
rinse the canister, the filter support, and the
cleaner under water or using a hose, as shown
in Figure 28.
F igu r e 2 8 . W a sh F ilt e r C a nist e r
6 . 2 . C o r d T a ngling
I M P O R T A N T
Cleaner power cable may become tangled if correct
procedure is not followed after each cleaning cycle.
Tangling of the power cable can occur more frequently
when operating the cleaner on the automatic timer
7-Day Programmed Cycle (9450/P945 and 9550/P955).
Do not leave the cleaner unattended for prolonged
periods and follow the procedure below to avoid
excessive tangling.
Page 17
7